Modern Fireplace Surrounds Clyde Hill
Clyde Hill is changing house by house. Older ramblers get opened up, and new homes replace some of them, and the fireplace wall usually ends up as a blank rectangle waiting for an idea. Modern fireplace surrounds in Clyde Hill give that wall one. Crafthammer Designs designs and builds them in concrete, steel, stone, and wood, drawn to your room and made by hand since 2012. Send a photo of your fireplace, and we’ll sketch what a clean, well-proportioned surround could do.
- Since 2012
- 500+ custom projects
- Cast, carved and forged by hand
- American made
From Rambler to Contemporary
The typical Clyde Hill remodel opens up a rambler’s rooms, raises the light, and strips out the old finishes. The fireplace often survives, with its brick face, its tile hearth, and its thin shelf. Against new white walls and pale floors, it looks dated overnight.
A modern surround solves that without moving the firebox. It replaces everything the eye sees with a single composed design: a hearth with clean edges, a face in one or two materials, and a mantel with real presence. The opening stays where it is, so the change is mostly visual, and the effect is large.
Flat planes and shadow lines
Modern surrounds rely on precise geometry. A thin shadow gap between the metal frame and the wall, a flat concrete face with sharp corners, a long, low hearth that runs past the opening: these are details that look simple and demand exact fabrication. We build to the millimeter, which is why we measure the actual wall before drawing.
One material or two
A single material, such as honed concrete, gives the quietest result. Two materials, such as stone below and steel above, give more contrast. Three or more start to compete. We recommend the smallest palette that does the job and sketch the options for your room.
Call 425-800-8180 to sketch your surround
Materials for a Modern Surround
- Concrete. Smooth, honed, and precise. It makes sharp edges, long spans, and clean planes. See our concrete mantel and concrete hearth pages for the cast pieces.
- Steel. Thin frames, shadow lines, and hidden support. Our iron fireplace details page covers metalwork.
- Stone. Tight, flat courses add texture without a rustic feel, as the custom stone fireplace page describes.
- Wood. A slim slab warms a cool palette, shown on the live edge mantel page.
Planning Around the Rest of the Wall
A modern surround is only as good as its surroundings. Before we draw, we look at what’s near the fireplace: a TV, built-in shelves, a window, a stair. Each one affects the surround’s width, height, and depth.
A TV above
If a screen is going over the fireplace, the modern fireplace surround and the TV have to be designed as one wall. We ask how big the screen is, how high it will hang, and where the cables run, then settle depth and height together.
Built-ins on either side
Cabinets and shelves beside the fireplace meet the surround along a vertical edge, and any mismatch shows. We measure the actual openings and make the surround’s width and height line up with them.
Gas fireplace limits
A factory-built gas unit comes with a listing that fixes clearances and weight limits. We read it before drawing, and we’ll tell you if it means a shallower profile than you hoped for.
Proportions matter more than the material
A modern fireplace surround succeeds or fails on its proportions. The width compared with the opening, the height compared with the ceiling, and the depth compared with the room are what the eye reads before it notices what the surround is made of. We draw the wall at several sizes and let you compare them, because a surround that’s a few inches too wide can feel heavy, and one that’s a few inches too narrow can feel timid.
What a modern surround demands from the maker
Simple shapes leave nowhere to hide. A rough edge, a gap at a corner, or a surface that isn’t flat shows immediately. That’s why we build to measured dimensions, test-fit pieces in the shop, and finish edges by hand. A modern fireplace surround looks effortless only because the work behind it was exact.
Taking a rambler’s fireplace modern
Many Clyde Hill ramblers have a fireplace that deserves a modern fireplace surround but sits in a room with low ceilings. In those rooms we keep the projection shallow and the lines horizontal, so the surround adds presence without making the ceiling feel lower.
Lighting the wall
A modern surround looks different at noon and at night. A small recessed or hidden light across the face brings out texture and gives the wall a glow when the fire is off. We can plan the channel for that wiring while the surround is being made.
Clyde Hill Modern Surround Questions
It's the framing around a fireplace opening, designed with clean lines, simple shapes, and a small number of materials. It usually includes a hearth, a face, and a mantel, and it's made to the exact size of your wall.
Yes. Most projects keep the existing firebox and replace what surrounds it. We check the unit's specifications and your photos and tell you what's allowed.
Concrete gives the cleanest planes, steel gives the sharpest lines, and stone adds texture. Many designs combine two. We sketch the options in your room so you can compare them.
Plan the mantel depth, the screen height, and the cable path together from the start. We ask for your TV size and location, then design the surround around them.
The price depends on materials, size, and complexity. We give you a figure for your specific design before fabrication begins.