Service Area

CRAFTHAMMER DESIGNS   •   AMERICAN MADE FURNITURE   •  
✕

Fireplace Remodeling Clyde Hill

Clyde Hill has no commercial district, so the house is where everything happens. Families live in these rooms, and the fireplace is often the one feature that hasn’t kept up. Crafthammer Designs does fireplace remodeling in Clyde Hill with hand-built hearths, mantels, and surrounds in concrete, stone, wood, and steel, and we’ve worked this way since 2012. Send us a photo of your fireplace and the width of the opening, and we’ll show you what could change and what it costs.

  • Building since 2012
  • 500+ custom projects
  • Designed and built by hand
  • American made

A Small Part of the Remodel With a Big Effect

When people remodel a kitchen or a bathroom, the work is obvious. A fireplace remodel is quieter. You keep the room, keep the opening, and change what frames it. Done well, the effect is out of proportion to the effort, because the fireplace wall is the one surface everyone in the room faces.

In Clyde Hill that wall often belongs to a house with a story. A mid-century rambler on a sloping lot, a 1980s remodel with a heavy brick surround, a newer house built to catch the view. The remodel’s job is to respect the house and fix what bothers you about the fireplace.

What Usually Needs to Change

After enough fireplaces, the same few problems come up again and again. Here is what we look for first.

  • A hearth that is too shallow. Many older hearths are only a few inches deep, which looks stingy and gives you nowhere to set anything down. Our page on a concrete hearth in Clyde Hill covers raised and flush options.
  • A mantel that is too thin or too dark. A skinny board over a wide opening looks like an afterthought. A new mantel, whether slim and clean or thick and substantial, resets the room. See our page on a concrete mantel in Clyde Hill for the cast option.
  • A surround from another decade. Dated tile, brass trim, and heavy brick all say the same thing. Re-facing in stone or building a clean modern surround brings the wall forward, and our rustic rebuild page covers dated brick.
  • Proportions that don’t fit the room. If the opening looks small in the wall, the fix is often a wider surround, not a bigger firebox.

Gas or wood: what the fireplace type means for a remodel

The type of fireplace changes what’s possible. Many Clyde Hill homes have a masonry fireplace built for wood, sometimes later fitted with a gas insert. Others have a factory-built gas unit framed into the wall. Masonry tends to tolerate more weight on its face, which opens the door to full stone. Factory-built units come with a listing that spells out clearances and limits, and those limits shape the surround.

In both cases we start by finding out exactly what you have. A clear photo of the firebox, the label inside it if there is one, and the framing around it tell us most of what we need. From there we plan fireplace remodeling that stays within what the unit allows.

What changes, and what stays

The most satisfying remodels keep what’s good. Often that means the opening, the chimney line, and the floor. What changes is everything the eye lands on: the face, the hearth, and the mantel. Because most of those elements can be fabricated off-site and set in place, the work is more contained than people expect.

We usually show two or three directions in sketch form, such as a stone face with a concrete hearth, a clean concrete surround with a steel edge, or a wood mantel over a re-faced brick wall. Seeing them side by side makes the decision far easier than describing them.

Remodeling in Rooms With Views and Tight Space

Many Clyde Hill rooms are asked to do two things at once: show off a view and still feel cozy. That tension shapes the remodel more than any style choice does.

When the view is the main event

If the main wall is glass, the fireplace sits on a secondary wall and has to avoid competing. Calm materials work best: honed concrete, a quiet stone, a thin steel edge. The goal is a fireplace that looks good when you glance at it and doesn’t pull your eye from the window.

When the room is small

In a compact living room, every inch of projection matters. A deep mantel can crowd the space and a tall surround can swallow the ceiling. We sketch the wall with furniture drawn in, so you see how much floor and air the new fireplace takes before we build.

When the house has more than one level

Hillside homes often have a main-level living room and a lower-level family room, each with its own fireplace. We design them as a pair: related materials, different scales. The upper fireplace is usually more formal and the lower one more casual and durable.

Call 425-800-8180 to talk about your fireplace

The Way We Run a Remodel

  1. You send photos of the fireplace and wall, the opening width, and the ceiling height.
  2. We send back sketches that show a few different directions.
  3. You choose a direction and see the cost before anything is built.
  4. Mantels, hearths, and metalwork are made in our Seattle shop. Stonework is set on site.
  5. We install the pieces, check the fit, and leave the room ready to use.

How disruptive is the work?

Less than most remodels, because much of the fabrication happens off-site. The fireplace is out of service while the work is underway, and we tell you in advance how long the on-site portion should take.

Can I stay in the house during the project?

Yes, in most cases. We protect floors and furniture near the work area and keep the dust contained. If the project is larger than a surround, such as a full masonry rebuild, we talk through the practical details before it begins.

How we talk about price

Fireplace remodeling in Clyde Hill is priced to the design, so a new mantel and a full stone surround land in very different places. The main drivers are material, size, and how much structure has to be added or reworked. We don’t publish ranges, because they’d mislead more than they’d help. We do give you a number for your specific design before any work starts, and we separate the options so you can see what each choice adds.

Working alongside your builder or designer

Many Clyde Hill homes are in the middle of larger renovations. When fireplace remodeling is one piece of a bigger project, we coordinate directly with your general contractor or designer. We share dimensions and templates, agree on delivery dates, and fit our schedule to the day the wall is ready. If you’re managing the project yourself, we keep the timeline simple and tell you what has to happen before we arrive.

Questions to settle before you order anything

  • What type of fireplace do I have, and what does its listing allow near the opening?
  • Will a TV go above the mantel, and how high?
  • How much floor space can the new hearth take?
  • Should the new fireplace match the floors and cabinetry, or contrast with them?
  • Does my builder or designer need drawings or templates from us?

You don’t need answers to all of them. We work through the rest together once we see photos.

A word on timing

Fireplace remodeling in Clyde Hill goes smoothest when it’s planned ahead of other work in the room. If the floor is being refinished or the walls repainted, decide on the fireplace first, because the hearth and the surround touch both. We can share a schedule early so painters, flooring crews, and our installation don’t collide, and so the remodeling never holds up the rest of the project.

If the fireplace is the only thing changing, the timeline is simpler. Design and fabrication come first, then a short on-site stage. We tell you honestly how long each part takes, and we flag anything that could stretch the schedule before it does.

Neighboring Communities We Also Serve

Clyde Hill borders Bellevue and Medina, and projects often cross those lines. Our Bellevue custom fireplace design page covers a similar mix of homes across the road. For lakeside estates, fireplace design in Medina goes further into that style. If you want to see the cast-concrete approach used in a different setting, the Bellevue concrete mantel page explains it in detail. Fireplace remodeling often crosses these borders, so it’s worth reading about the neighbors too. For specific materials in town, see custom stone fireplaces in Clyde Hill, live edge mantels, iron fireplace details, and luxury fireplace remodeling.

Clyde Hill Fireplace Remodeling Questions

It depends on materials, size, and how much of the existing structure is reused, so there isn't one number. A new mantel costs less than a full stone surround. You'll know what your design costs before any fabrication starts.

Show us the fireplace you want to change

A photo and the opening width are enough to begin. We’ll tell you what we’d do and what it costs.