Rustic Fireplace Rebuild Clyde Hill
Some Clyde Hill houses have a fireplace worth saving: broad brick, honest proportions, a chimney that has stood for decades. What they lack is a face that does it justice. A rustic fireplace rebuild in Clyde Hill keeps the good parts and replaces the rest with hand-laid stone, a heavy timber mantel, and a hearth with real depth. Crafthammer Designs does the work by hand and has built in stone, wood, concrete, and steel since 2012. Send a photo, and we’ll show you what could stay and what should change.
- Since 2012
- 500+ custom projects
- Cast, carved and forged by hand
- American made
Keeping What’s Worth Keeping
A rebuild isn’t a demolition. The most satisfying ones begin with an honest look at what the existing fireplace does well. The opening is in the right place. The chimney line is sound. The proportions suit the room. What’s wrong is usually the surface: dated brick, a shelf too thin to matter, a hearth barely raised off the floor.
We start there. We photograph and measure what exists, check the masonry’s condition, and decide which parts can carry new materials. Then we design the new face around that structure, so the finished fireplace looks like it was always this way, only better.
Stone over brick
Hand-laid stone can transform a brick face. Depending on the brick’s condition and the firebox construction, stone can go over the existing surface or replace it. We look at photos first and tell you which approach fits.
Timber where it counts
A heavy mantel in solid timber or a live edge slab gives a rebuilt fireplace its character. It anchors the composition and gives the room a place to display things. We size it to the wall and set it with hidden or forged support.
A hearth with depth
Older hearths are often a few inches deep. A deeper, raised hearth in stone or cast concrete makes the fireplace more useful and more balanced, and gives the stone above something to sit on.
Call 425-800-8180 to talk through a rebuild
What Rustic Means Here
In Clyde Hill, rustic doesn’t mean cabin. It means material with texture and age, used with restraint. That might be a split-face stone in warm tones, a beam with a soft, hand-finished edge, and forged hardware with a quiet black finish. The goal is warmth and weight inside a house that’s otherwise refined.
- Natural stone with variation, laid by hand so color and size stay balanced across the wall.
- Solid timber, finished to show grain and wear gracefully.
- Forged iron, in simple shapes that support or accent without decorating.
- Restraint, because rustic in a small room needs fewer elements, not more.
For the stone side in detail, see our custom stone fireplace page for Clyde Hill. The wood side is covered by the live edge mantel page, and the iron side by the iron fireplace details page.
Safety and Structure First
Rebuilding a fireplace means working with an existing structure, and we respect what it can do. We confirm the firebox and chimney are sound, check clearances, and read the manufacturer’s information if there is a factory unit. If something needs a qualified inspection or repair before new work goes on, we tell you before spending your money on materials.
How a rebuild runs
A rebuild starts with your photos of the fireplace and room, the opening width, and the ceiling height. We sketch what stays and what changes, you choose a design and see the price, and only then do we start making the mantel, hearth, and metalwork in the shop. When the pieces are ready, we prepare the existing structure, set the stone, and install everything.
Our fireplace remodeling in Clyde Hill page covers the full range of changes we make, and the concrete hearth page explains the modern alternative to a stone base.
Patina worth keeping
Old brick often has character that new material can’t fake: slightly uneven color, softened edges, the marks of decades of fires. In a fireplace rebuild we look for what’s worth preserving and design around it, whether that means keeping a section of brick exposed or matching new stone to its tones.
Chimney breast and mantel proportion
The chimney breast above the mantel is part of the fireplace, and in a rebuild it can be faced, visually widened, or left alone. Getting the proportions of the whole breast right does more for a fireplace rebuild than any single material choice.
Lighting a textured face
Stone and timber look best in raking light, with a lamp or a small fixture to one side that throws shadows across the surface. We think about where light will fall, so the rebuilt face looks as good at night as it does in daylight.
Clyde Hill Fireplace Rebuild Questions
A remodel changes the surround, mantel, and hearth around an existing firebox. A rebuild goes further and may replace or repair parts of the masonry itself. We look at your photos and recommend whichever fits the fireplace you have.
Often, yes. Brick can be cleaned and kept as part of the design, or covered with stone. We assess its condition and tell you what's practical and what would look best.
It can be if it's overdone. We use fewer, better elements and sketch the wall at scale, so you can judge how much stone and timber the room can carry.
Cosmetic rebuilds don't alter the firebox or chimney. If your project touches the firebox or venting, we say so and recommend a qualified professional for that part'
The price depends on the materials, the size of the wall, and how much of the existing structure is reworked. You'll know the figure before we begin.