Rustic Fireplace Rebuild Kirkland
Juanita and Finn Hill have plenty of homes from the seventies and eighties, built with a big brick fireplace as the centerpiece. Those fireplaces have good bones and dated faces: dark brick, a raised hearth, a heavy wood shelf painted over once too often. A rustic fireplace rebuild in Kirkland keeps the structure and replaces what you see with hand-laid stone, solid timber, and a hearth with the right proportions. We’ve shaped stone, timber, concrete, and iron by hand at Crafthammer Designs since 2012. Send a photo, and we’ll say what deserves to stay.
- Since 2012
- 500+ custom projects
- Cast, carved and forged by hand
- American made
Giving a Seventies Fireplace a Second Life
The fireplaces of that era were generous: wide openings, raised hearths, and a lot of masonry. That generosity is an asset. The proportions are often better than what’s built now. What lets them down is surface: dark, uniform brick, a mantel that’s lost its lines, a hearth with worn edges.
A rebuild works with that generosity. Rather than shrinking the fireplace, we refresh it. Stone laid over or in place of the old face lightens and warms the wall. A heavier, better-proportioned mantel gives the room a focus. A hearth with a clean edge makes the whole fireplace feel intentional.
Stone over brick
Depending on the brick’s condition and the structure behind it, stone can go over the existing face or replace it. We look at photos first and tell you which approach suits your fireplace, and what we’d want to verify on site.
Rethinking the raised hearth
Raised brick hearths from that era are often a bit high and a bit shallow. A new hearth at a more comfortable height, with more depth and softer edges, makes the fireplace more usable and visually balanced.
Call 425-800-8180 to talk through a rebuild
Rustic, Kirkland Style
Kirkland’s houses tend to be comfortable and light, so rustic here usually means warm, natural, and textured without becoming heavy. A pale or mixed stone, a timber with a lighter finish, and iron details in a quiet black suit the setting better than dark, chunky materials.
- Stone. Chosen for a lighter, warmer tone, and laid in a pattern that suits the room. See the custom stone fireplace page for Kirkland.
- Timber. A substantial but not oversized beam or slab, as described on the live edge mantel page.
- A durable hearth. Lower and deeper, in cast concrete or stone, as the concrete hearth page explains.
- Iron details. Brackets and straps with a hand-finished look, covered on the fireplace metalwork page.
Checking What’s Under the Old Face
An older fireplace deserves a careful look before new work starts. We check the masonry’s condition for cracks, loose mortar, and moisture. We confirm the firebox and flue are sound, or tell you if they need professional attention. And we work out how much weight the structure can carry, so the new stone is within its limits.
If something needs a qualified inspection or repair first, you’ll hear it before any new material is ordered. Our work is design and fabrication, and we’d much rather tell you early than discover a problem behind fresh stone.
How the work runs
Start by sending photos and the opening width. We draw the rebuilt fireplace, marking what stays and what goes, and give you the price once you’ve chosen a design. The new mantel, hearth, and metalwork are made in our Seattle shop; later we strip the old face, ready the structure, and set the stone. For a modern alternative, see modern fireplace surrounds in Kirkland, and for the overview, custom fireplace design in Kirkland.
What a fireplace rebuild does for a 1970s house
A fireplace rebuild in a seventies house usually lightens the room. Dark brick comes off, lighter stone goes on, and the wall stops absorbing light. The fireplace stays generous in scale, which suits the house, while looking fresh and cared for.
Doing a fireplace rebuild in stages
Some owners start with the hearth and mantel and add a stone face later. If you’d like to phase a fireplace rebuild, tell us up front, and we’ll design the first stage so the second fits without rework.
Keeping the room usable
Most of the work happens in our shop, so your fireplace stays in use until installation. We tell you how long it will be out of service, and we schedule the on-site stage for a quiet stretch.
Lighter stone for lighter rooms
Many Juanita and Finn Hill houses have good natural light and pale walls. A warm, light stone keeps the fireplace in harmony with the room, while very dark stone can feel heavy. We show your wall with a few tones so you can choose with your eyes.
Kirkland Fireplace Rebuild Questions
Often, yes. We check the masonry and structure, tell you what it can support, and design a rebuild that suits the room's proportions. Many of these fireplaces have excellent bones.
No. A raised hearth can be lowered, deepened, or reshaped, as long as it meets the fireplace's required protected area. We sketch options so you can see the difference.
Not if the tone is chosen well. A lighter or mixed stone can brighten a wall that dark brick has weighed down. We show your wall with a few stone options so you can judge.
Not by a surface rebuild. If anything suggests the firebox or flue needs work, we say so and point you to a qualified professional.
The stone and timber, the scale of the wall, and anything found behind the old brick. We give you the figure before work starts.