Service Area

CRAFTHAMMER DESIGNS   •   AMERICAN MADE FURNITURE   •  
✕

Rustic Fireplace Rebuild Issaquah

Olde Town has cottages with a century of stories, and the hillsides above it have timber houses that were built to be warm. Their fireplaces carry the same history, and sometimes the same wear: cracked mortar, a face re-covered in the 1980s, a mantel that’s lost its proportion. A rustic fireplace rebuild in Issaquah restores the heart of those houses with hand-laid stone, solid timber, and a hearth that works. Crafthammer Designs builds by hand and has worked in stone, wood, concrete, and steel since 2012. Send a photo, and we’ll tell you what we’d keep.

  • Since 2012
  • 500+ custom projects
  • Cast, carved and forged by hand
  • American made

Old Fireplaces With Good Bones

A fireplace that’s survived decades has proved something: its structure works. The chimney draws, the firebox holds, and the opening is in the right place. What’s usually wrong is the surface, from re-covering that never quite fit, a mantel that was swapped for something cheaper, or a hearth that’s cracked and uneven.

A rebuild starts by respecting that structure. We look closely at the masonry, check its condition, and find out what it can carry. Then we design a face, a mantel, and a hearth that suit the house and its age. Done well, the result looks like the fireplace the house always deserved.

For a cottage in Olde Town

Small rooms and low ceilings call for modest proportions. A compact stone face, a sturdy timber mantel, and a raised hearth that doesn’t crowd the room give a cottage fireplace its charm without overwhelming it. Stone with a softer, older look, and a mantel with a hand-hewn feel, tend to suit.

For a hillside timber house

Bigger rooms and heavier materials call for a bolder approach. A broad stone face in a varied pattern, a thick beam above, and a deep hearth let the fireplace hold its own against exposed rafters and tall windows.

Call 425-800-8180 to talk through a rebuild

What We Look at First

  1. The masonry’s condition. Cracks, spalling, and loose mortar tell us what must be repaired before anything new goes on.
  2. The firebox and flue. We don’t alter either, but we want to know if they need professional attention.
  3. Moisture. Issaquah’s damp climate means checking for signs of water behind and around the face.
  4. The structure. We confirm what the framing and floor can carry in added stone.

If a qualified inspection or repair should come first, you’ll hear about it before any new material is ordered. We are a design and fabrication shop, and we’d rather tell you early than discover a problem after the stone is set.

The Rebuild, Piece by Piece

Stone

Natural stone laid by hand, chosen for color and scale and matched to the house’s age and style. The custom stone fireplace page for Issaquah covers the options.

Timber

A solid beam or live edge slab, finished to show its grain and set on hidden or forged support. The live edge mantel page explains how we choose it.

Hearth

A deeper base in cast concrete or stone, as the concrete hearth page describes, with edges that stand up to boots and logs.

Iron

Forged brackets, straps, or a screen that add a handmade finishing detail, shown on the forged fireplace hardware page.

For the wider view of what we do in town, see fireplace design in Issaquah, and for projects at the highest specification, the luxury fireplace remodel page.

Why a fireplace rebuild suits an older Issaquah house

Older houses were built to be warmed by their fireplaces, and a fireplace rebuild honors that. New stone, timber, and iron laid over a sound structure give the house a hearth that’s worth gathering around again, without erasing the character that made the house worth keeping.

Doing a fireplace rebuild in stages

A fireplace rebuild can be phased. Many owners start with the hearth and mantel and add a stone face later. If you’d like to stage the work, tell us up front, and we’ll design the first stage so the second fits without rework.

Chimney breast and proportion

The chimney breast above the mantel is part of the composition, and in a rebuild it can be faced, widened visually, or left alone. Getting its proportion right does more than any single material choice.

Hearth height in an older room

Older Issaquah rooms often have low ceilings and tight proportions, and the hearth’s height changes how the whole fireplace feels. A low, wide hearth suits a cottage, while a taller bench-height one gives a lodge-style room a place to sit. We sketch both so you can judge the effect.

Issaquah Fireplace Rebuild Questions

Often, yes. We check the masonry and the structure, tell you what it can support, and design a rebuild in proportion with the room. Small cottages usually call for modest, well-made materials.

Send photos of your cottage or hillside fireplace

A picture and the opening width are enough to start. We’ll tell you what could stay and what should change.