Service Area

CRAFTHAMMER DESIGNS   •   AMERICAN MADE FURNITURE   •  
✕

Fireplace Design Medina

Medina is a small city with an unusual range of houses: lakefront estates, older homes on the points, and new construction replacing aging lots. Each one wants something different from its fireplace. Crafthammer Designs handles fireplace design in Medina from the first sketch to the final set, using stone, wood, concrete, and iron made by hand since 2012. Send a photo of the room, and we’ll tell you what we’d build and what it costs before anything is made.

  • Building since 2012
  • 500+ custom projects
  • Designed and built by hand
  • American made

Three Kinds of Medina Homes, Three Different Fireplaces

Walk or drive the length of Evergreen Point Road and you pass houses from several eras, sometimes side by side. We start every project by working out which kind of house we’re designing for, because it changes almost every decision that follows.

Houses on the water

Near the shoreline and Medina Beach Park, living rooms are organized around the lake. By day the view does the work. After dark the windows turn black and the fireplace becomes the only thing in the room that glows. That’s why waterfront fireplaces need real presence: enough scale and texture to hold a wall that sits between two sheets of glass.

Older homes on the points

Some of Medina’s longer-standing houses have fireplaces from an earlier era, usually brick or stone, usually a little low and a little narrow for the room they now serve. The best of them are worth keeping. A new hearth, a heavier mantel, and a re-faced surround can make an old fireplace look like the best idea in the house.

New construction and full rebuilds

Where a lot has been rebuilt, the architect usually draws the fireplace as one clean opening in a large wall. Our job there is to turn that opening into something with material and craft in it, working from the plans and the finishes already chosen so the piece belongs to the house.

The common thread is proportion. A fireplace that is a few inches too short or a mantel that is a little too thin reads as a mistake in a room this carefully made. We sketch before we build, and we look at the wall at more than one scale.

What We Build for Medina Fireplaces

Everything is designed for the room it goes into and made by hand. Nothing starts as a catalog item, which is what makes fireplace design in Medina different from picking a surround off a shelf.

  • Complete remodels. A new surround, hearth, and mantel designed together. Our page on luxury fireplace remodeling in Medina explains how that works with architects and builders.
  • Hand-laid stone. Full-height walls, partial faces, and re-faced masonry, covered on our page about a custom stone fireplace in Medina. Finished walls appear in the masonry gallery.
  • Wood mantels. Solid beams and live edge slabs sized to the wall, explained on our live edge mantel page for Medina. See the mantel gallery for examples.
  • Cast concrete. Mantels and hearths with precise edges and honed surfaces, which we describe on our concrete mantel page for neighboring Bellevue.
  • Forged iron and steel. Brackets, straps, and screens that match the design, shown in the iron hardware gallery.
  • Single-point coordination. One team handles design, fabrication, and installation, so you aren’t managing three vendors.

Why the lot matters as much as the room

Fireplace design in Medina starts with the property as much as the room. A house that faces the lake wants a different fireplace from one tucked behind mature trees, and a public room on the street side has different needs from a private family room at the back. We ask which rooms are used daily and which are saved for occasions, because good fireplace design puts the most craft where people spend the most time.

That conversation also tells us about light, sightlines, and traffic through the room. Those details rarely show up in a floor plan, and they decide whether a fireplace feels like part of the house or an object placed in it.

The details that make hand-built work different

In a large house, the small things are what people notice when they stand close. Joints should be tight and consistent. Edges should be deliberate, either crisp or softly eased, but never accidental. A mantel should sit flush to the wall without a shadow gap, and a hearth should meet the floor without a visible seam.

Those details come from measuring the actual wall, not working from a drawing alone, and from building each piece to the dimensions we recorded. They also come from finishing surfaces by hand: smoothing a slab edge, sealing stone so it resists soot, setting forged hardware so the fasteners disappear. None of it is flashy. All of it separates a fireplace that looks installed from one that looks like it grew there.

Fireplaces for entertaining

Medina houses are often built for gatherings, and the fireplace is usually where people drift. That affects the design more than most owners expect. A deeper hearth gives guests somewhere to perch with a glass. A mantel with a clear, uncluttered length makes room for seasonal arrangements. Even the height of the surround matters, because it decides what people see when they stand beside it in conversation.

We think through sightlines, walkways, and how many people the room needs to hold. A fireplace that works at a dinner party and still feels right on a quiet Tuesday night is the goal, and it comes from planning the proportions around real use.

Choosing Materials Room by Room

Large Medina houses often have more than one fireplace, and each room has its own job. We choose materials by what the room does, not by a single style across the whole house.

The great room

This is the room guests see first, and it usually has the tallest ceiling. Stone works well here because it adds texture without competing with the view. A full-height stone wall gives a tall room a vertical line, while a lower face with a heavy mantel suits a wider, more horizontal space.

The library or study

Smaller rooms reward warmth and detail. A solid wood mantel with a hand-finished edge, a stone hearth with a restrained profile, and forged hardware you can examine up close all suit a room people sit in for hours. Wood and iron feel right at that scale.

The lower-level lounge

Media rooms and lounges often take a more modern approach. Honed concrete, a steel frame, and clean lines work with a TV on the wall and low lighting. We plan for heat, cable routing, and viewing height from the start, so the screen and the fireplace share a wall without fighting.

For more detail by topic, see our pages on modern fireplace surrounds in Medina, rustic fireplace rebuilds, concrete hearths, concrete mantels, and fireplace ironwork.

Talk through your rooms: 425-800-8180

How a Medina Project Runs

  1. You send photos of the fireplace and wall, the opening width, and the ceiling height. Plans are welcome if an architect is involved.
  2. We sketch ideas and recommend materials for each room.
  3. You see the cost for the design you choose before anything is built.
  4. We fabricate mantels, hearths, and metalwork in our Seattle shop, and set stone on site.
  5. We install, finish, and walk through the work with you.

Heat, clearances, and what the code requires

Every fireplace has limits, and good design starts from them. The manufacturer’s listing for a factory-built unit, or the construction of a masonry firebox, decides how close combustible materials can sit to the opening and how much weight the structure can carry. Local code adds its own requirements.

We read those details before we draw. Stone and concrete don’t burn, which gives you freedom near the opening, while wood mantels have to respect clearance rules. If something in the existing fireplace needs a qualified inspection or repair before we build, we tell you plainly and let you decide how to proceed.

Can you work around my schedule and my builder’s?

Yes. If a general contractor or designer is running the project, we coordinate directly and time deliveries to when the wall is ready. If you’re on your own, we agree on a schedule with you and keep to it.

Do you need to visit before giving me a number?

Often photos and measurements are enough for a first estimate. If a project needs a closer look, such as a structural question or an unusual existing firebox, we say so and arrange it.

What our first conversation covers

Our first conversation about fireplace design in Medina is short and practical. We ask about the room, the people who use it, and anything already decided, such as flooring or cabinetry. Then we look at your photos and tell you how we’d approach the fireplace design, what it would involve, and what we’d need from you next.

Nearby Eastside Communities

Medina sits beside several places we also serve, and each has its own character. Across the water, our custom fireplace design in Bellevue page covers a mix of mid-century ramblers and glass-heavy new builds. Just to the south, fireplace remodeling in Clyde Hill focuses on hillside homes and compact rooms. For projects north of the bridge, the Kirkland page covers waterfront and infill houses.

Medina Fireplace Questions

Fireplace design covers the shape, materials, and proportions of the surround, mantel, and hearth, and how they fit the room. At Crafthammer Designs it includes sketches, a cost, fabrication, and installation, so one team carries the design through to the finished wall.

Start with a photo of your fireplace

Send the room, the opening width, and anything you already know you want. We’ll come back with ideas, materials, and a cost.

Need A Custom Interior Now?

Available for custom designs, handcrafted furniture, and premium interior solutions.