Fireplace Ironwork North Bend
Mountain houses are built from heavy things: logs, stone, and timber that took two people to lift. The metal in them should keep up. Thin, shiny brackets and decorative screens look like toys beside a beam. Fireplace ironwork in North Bend is made with the same seriousness as the rest of the building: thick, forged, and finished by hand. Crafthammer Designs makes it to fit your fireplace and has worked in metal, stone, wood, and concrete since 2012. Send a photo, and we’ll show you what could belong.
- Since 2012
- 500+ custom projects
- Cast, carved and forged by hand
- American made
Iron That Matches the Weight of the House
Scale is the first rule of ironwork in a mountain home. A bracket under a six-inch beam should be substantial enough to look like it’s doing the job. A strap across a slab should be thick enough that you believe it holds the timber together. Pieces that are too light look decorative and weaken the whole composition.
We build ironwork in proportion. Bars are thick, ends are shaped with a little irregularity, and surfaces carry a faint hammer texture. The pieces look like they came from a smithy, because that’s the tradition they draw on, and they feel solid when you touch them.
Straps and bands
Wrought-looking straps wrapped around a timber mantel suggest the old craft of binding heavy wood. They’re one of the most requested details, and they work best on a thick slab or beam.
Brackets and corbels
Brackets under a heavy mantel carry real weight and show it. We size them to the load and anchor them into the structure behind, whether that’s framing or masonry.
Screens and doors
A fitted screen is both practical and handsome. For wood fires, it holds sparks in, and its frame can match the other iron in the room, so everything looks of a piece.
Hardware
Handles, latches, and hinges for screens and doors, shaped to feel good in the hand and finished to match.
Call 425-800-8180 to plan your ironwork
Built for Smoke, Damp, and Daily Use
A mountain fireplace sees a lot of use. It’s lit daily for months, the room is damp from the weather outside, and the hardware is handled constantly. Ironwork has to survive that and age well.
- Sealed against moisture. Each piece gets a finish chosen for its location, so damp doesn’t turn it to rust.
- Heat-aware design. The fireplace’s listing or construction and local code set how close metal can sit to the opening, and we respect those distances.
- Soot-friendly finish. A matte, dark finish hides soot better than a polished one and wipes clean with a dry cloth.
- Solid fastening. Pieces are anchored into framing or masonry, not just surfaces.
The iron hardware gallery shows examples of finished work.
Where Iron Belongs in Your Fireplace
You don’t need a full set. Many owners start with one or two pieces and add more over time. These are the usual starting points.
If your mantel looks thin or unsupported
Start with brackets. They make the mantel look anchored and give the room a visible sign of craft. Pair them with a thicker mantel, such as the slab described on the live edge mantel page for North Bend.
If your opening looks bare
Start with a screen. A well-fitted screen finishes the fireplace and changes how it looks when it’s not burning.
If you’re rebuilding the face
Include iron in the plan from the start. Our rustic fireplace rebuild page and the luxury fireplace remodel page describe how it fits into a larger project. For modern mountain homes, modern fireplace surrounds in North Bend shows thinner, cleaner uses of metal, and the stone hearth page covers the base.
How fireplace ironwork gets made
Good fireplace ironwork starts with measurements taken at the fireplace. We lay out each piece, shape and join the metal, then clean and finish it by hand. A test fit in our shop confirms that holes line up and edges close squarely before anything goes to your house.
Choosing among straps, brackets, and screens
Straps wrap and bind timber, brackets carry weight visibly, and screens close the opening. Which belongs in your fireplace ironwork depends on what the fireplace is missing, and we’ll say honestly if a piece wouldn’t add much.
Ironwork and stoves
If you have a wood stove, its manufacturer sets the clearances for any metal nearby. We read them first, so fireplace ironwork around a stove respects the distances and looks as if it belongs.
Matching other iron in the house
Many mountain houses already have iron: door hardware, light fixtures, stair railings. We look at those pieces and match the finish and weight, so the fireplace ironwork reads as part of the same family.
North Bend Ironwork Questions
Thick enough to carry the load with a margin and to look it. We size them to the mantel's weight and the wall's structure, and we explain what the wall needs for secure anchoring.
Usually. Brackets, straps, and screens can often be added without rebuilding. We review photos and measurements and confirm what would fit and how it's mounted.
Yes, when it's sealed properly. Each piece gets a finish suited to its location, and a working fireplace's warmth helps keep it dry.
We can make screens for open fireplaces. For stoves, the manufacturer's clearances and requirements set what's allowed, and we confirm them before designing anything.
How many pieces you want, how large and heavy they are, and the finish. The quote comes before any fabrication starts.