Modern Fireplace Surrounds Sammamish
The typical plateau fireplace has a big square surround in builder tile or painted drywall, a thin mantel, and a TV mounted above it. It’s functional and a little forgettable. Modern fireplace surrounds in Sammamish replace that with a composed wall: clean planes, honest materials, and proportions made for the room. Crafthammer Designs builds them in concrete, steel, stone, and wood, by hand, and we’ve done it since 2012. Send a photo of your fireplace, and we’ll sketch how a modern surround could change the room.
- Since 2012
- 500+ custom projects
- Cast, carved and forged by hand
- American made
Rethinking a Builder’s Fireplace Wall
Builders in the 1990s and 2000s put in fireplaces with a standard formula: a framed box, a surround in whatever tile the model home used, a shelf, and a TV niche if you were lucky. Two decades later, the formula shows its age. The tile has dated, the proportions feel generic, and the TV never sat quite right.
A modern surround starts by throwing out the formula. We look at the wall as a whole: the ceiling height, the neighboring windows, the floor, the TV’s size and position. Then we draw a surround that fits those, with a clear geometry and a small palette of materials.
A taller composition for a two-story wall
If your great room has a double-height wall, the surround can rise as a single clean plane, in concrete, stone, or steel. A tall, narrow composition draws the eye up and makes the whole room feel intentional.
A lower, wider composition for a family room
In a standard-height room, a long, low surround with a floating shelf and a hearth that runs past the opening gives a quiet horizontal emphasis, and works neatly with a TV above.
Call 425-800-8180 to sketch your surround
Materials Compared in Plain Terms
- Concrete gives smooth planes and sharp edges, and it can be cast to any size. See our concrete mantel and concrete hearth pages.
- Steel adds thin frames, shadow lines, and hidden support, covered on the iron fireplace details page.
- Stone brings texture; tight flat courses suit modern rooms, as described on the custom stone fireplace page.
- Wood softens hard materials, shown on the live edge mantel page.
Practical Matters on the Plateau
Weight and framing
Many plateau fireplaces are factory-built units framed into the wall. Their listings set clearances and weight limits, and their framing decides what can be added. We read both before drawing, and we design the surround within them. That sometimes means a thinner profile than the sketch you’ve seen online.
The TV above
Most of our plateau clients want a screen over the fireplace. We design the mantel depth, the surround height, and the wiring channel together, and we ask for the screen’s size and mounting height at the start.
Painting and flooring around the new surround
A new surround touches the wall and the floor, and both need attention. We coordinate with your painter and flooring installer on timing, so the surround isn’t marred and the edges are finished cleanly.
Why a modern fireplace surround changes a plateau living room
Because the fireplace wall is the one everyone faces, a modern fireplace surround changes how the whole room feels. A cleaner wall makes the furniture look more intentional, and the proportions of the surround set the tone for everything else. Owners often say the room feels bigger afterward, even though nothing moved.
Flush or projecting
A surround can sit flush with the wall for a quiet, built-in look, or project to give the fireplace presence. Flush works in tight family rooms. Projecting works in great rooms that need a focal mass. We sketch both versions of your modern fireplace surround, so you can compare them.
A short palette
The most successful modern surrounds use two materials, maybe three. Concrete and steel make a crisp pair. Stone and wood make a warmer one. We help you choose a pair and show how each looks on your wall.
Lighting and the evening view
Plateau living rooms are often used in the evening, so we consider how the surround looks under lamps and firelight. A honed face glows softly, steel absorbs light, and stone throws small shadows. Where it helps, we plan a hidden channel for accent lighting.
Keeping up with a growing TV
Screens get larger, and a modern fireplace surround should survive the change. We leave flexibility in the mantel depth and wiring channel, so a bigger TV later doesn’t force a new surround.
Fitting the wall’s edges
Where a surround meets the ceiling, the floor, and the neighboring walls, the junctions decide whether the work looks finished. We plan every edge in the drawing and test-fit them in the shop, so the surround settles into your wall cleanly.
Sammamish Modern Surround Questions
Yes. Most projects keep the existing unit and replace everything around it. We read the unit's specifications and tell you what it can carry and how close materials can sit.
It gives the screen a context. A composed surround and mantel create a base and a frame, so the TV looks like part of a designed wall instead of an object hung over a fireplace.
Often, as a deliberate contrast, especially if the rest of the house has been updated. We sketch it in your room so you can judge whether it fits.
Usually, tile is removed and the surround built fresh. We review photos to see how it was installed and tell you what we'd find behind it.
Mostly the materials, the scale of the wall, and the precision of the detailing. You'll see a firm number for your design before we make anything.