Service Area

CRAFTHAMMER DESIGNS   •   AMERICAN MADE FURNITURE   •  
✕

Fireplace Ironwork Newcastle

Dark, strong, and unfussy, iron suits the stone and timber homes of Newcastle. Fireplace ironwork in Newcastle adds the strength and detail that make a stone-and-wood fireplace look finished. Crafthammer Designs makes forged iron and steel pieces, built to your fireplace and finished by hand, and we’ve worked in metal, stone, wood, and concrete since 2012. Send a photo of your fireplace, and we’ll show you where iron could earn its place.

  • Since 2012
  • 500+ custom projects
  • Cast, carved and forged by hand
  • American made

Iron Against Stone and Timber

Heavy materials need something to hold them together visually. Stone and timber alone can look soft or monotonous. Dark iron adds a hard line, a sense of structure, and a note of craft. A strap across a beam, a pair of brackets under a slab, a screen with a handmade frame: each gives the eye a contrast and the fireplace a sense of purpose.

Straps and bands

Iron straps wrapped over a timber beam or slab suggest strength and a hand-forged tradition. They’re often the detail people remember about a fireplace.

Brackets

Forged brackets under a heavy mantel make its support visible. They suit thick slabs and stone, and they’re sized to the load, then anchored into the wall’s structure.

Screens and doors

A custom screen fits the opening precisely and matches the surround. For wood-burning fireplaces, it also keeps sparks where they belong, within the limits the fireplace’s listing sets.

Hardware

Handles, hinges, and small fittings can be made to match the rest of the metalwork, so nothing looks borrowed from a catalog.

Call 425-800-8180 to plan your ironwork

Made to Last in a Damp Climate

Damp air is hard on bare iron, so every piece we make is sealed. Where a fireplace runs often, its warmth keeps the metal dry; where it sits idle through a rainy month, the sealer does the work. The tone can be an even flat black, a deeper blackened finish, or a match to your window frames and door hardware.

  • Raw and sealed. Even, matte, and understated.
  • Blackened. Deeper tone with subtle variation.
  • Matched to other metal. We can coordinate with window frames, door hardware, and lighting.

A dry cloth handles most upkeep, and we explain what to avoid for the finish you choose.

Respecting the fireplace

Hot metal near an opening has to respect the fireplace’s own rules. Its listing or construction and local code determine how near iron can sit, and we build to those distances, adding a gap or shield wherever the design calls for one.

Where to Add It

You don’t need a full rebuild to benefit from iron. Brackets, straps, and screens can often be added to an existing fireplace. They also work as part of a larger project, such as the rustic fireplace rebuild or a luxury fireplace remodel. For the materials iron sits beside, see our pages on a custom stone fireplace in Newcastle, a live edge mantel, and a concrete mantel. Finished pieces appear in the iron hardware gallery, and our Newcastle fireplace design overview shows how everything fits together.

How fireplace ironwork gets made

Good fireplace ironwork begins with measurements taken at the fireplace, not estimated from a catalog. We lay out each piece, cut and shape the metal, and join it, then clean the surfaces and apply the finish by hand. A final test fit in the shop confirms that holes line up and edges close squarely before anything goes to your house.

Straps, brackets, and screens compared

Straps wrap and visually bind a beam or slab, which suits rugged rooms. Brackets carry weight and are best where a mantel needs visible support. Screens close the opening and can be the most elaborate piece. Which one belongs in your room depends on what the fireplace is missing, and we’ll tell you honestly if a piece isn’t adding much.

Starting small

You don’t need a full set. A single well-made pair of brackets can change a fireplace, and more pieces can follow later in the same style. If you plan to add over time, we keep the design language consistent so each addition looks like it was always part of the plan.

Mixing iron with other metals

Some Newcastle homes have bronze or brass fixtures, others have black window frames and steel railings. Iron can match either, or sit quietly beside them. We look at the metals already in the room and choose a finish that agrees with them.

Sizing pieces to the wall

Ironwork on a tall stone wall should be bigger than on a small one. Thin brackets can look like an afterthought against a large stone face, so we scale straps and supports to the mass of the wall around them. We draw each piece in place to check the proportions before it’s made.

Newcastle Ironwork Questions

We make straps, brackets, screens, hearth edging, handles, hinges, and small fittings. Each piece is built to your fireplace and finished to suit the room.

Send photos of your fireplace and where you'd like iron

A picture and a few measurements are enough. We’ll sketch the pieces and tell you what they cost.

Need A Custom Interior Now?

Available for custom designs, handcrafted furniture, and premium interior solutions.