Custom Fireplace Design Redmond
Redmond homes tend to be built for people who care how things are made. Clean lines, good light, and a preference for objects that work. A fireplace should meet that standard. Crafthammer Designs offers custom fireplace design in Redmond with surrounds, mantels, and hearths built by hand in concrete, stone, wood, and steel, and we’ve been working this way since 2012. Send a photo of your fireplace, and we’ll tell you what we’d build and what it costs.
- Building since 2012
- 500+ custom projects
- Designed and built by hand
- American made
What Redmond Rooms Usually Need
Redmond covers a lot of ground, from the trees and older streets of Education Hill and Grass Lawn to the newer townhomes and apartments around Overlake and downtown. The fireplaces vary, but the design questions repeat.
- Where does the TV go? A large share of Redmond living rooms put a screen above or beside the fireplace. That one decision shapes mantel depth, surround height, and where cables run.
- How much visual weight can the wall carry? A clean modern room can take a strong surround. A room with lots of furniture and art may need a quieter one.
- What should be built in? Channels for cables, a recess for a speaker bar, or a ledge for display can all be planned into the piece.
We answer those questions in sketches before anything is cast, cut, or forged. Seeing the wall drawn with your furniture and TV in place makes most decisions easy.
Design Directions We Build
Clean and quiet
A cast concrete surround with sharp edges and a honed surface makes the fireplace feel like a piece of architecture. It suits open plans and lots of glass. Our page on a concrete mantel in Redmond explains the process, including how we build in cable channels, and the concrete hearth page covers the base.
Textured and grounded
Stone, especially in tight horizontal courses, adds depth and shadow. It works in tall rooms and next to flat walls, and it contrasts well with a smooth hearth. See finished stonework in the masonry gallery.
Warm and handmade
Our live edge mantel page for Redmond explains how a slab suits a media wall. A solid or live edge wood mantel, finished by hand, warms a room full of hard surfaces. It pairs well with concrete or steel and is easy to size to the opening. The mantel gallery shows a range of styles.
Sharp and industrial
Steel frames, thin edges, and forged hardware give a surround a crisp, graphic quality. They work in small amounts and as the main event, depending on the room.
For more detail by topic, see our pages on a custom stone fireplace in Redmond, modern fireplace surrounds, rustic fireplace rebuilds, and iron fireplace accents.
Call 425-800-8180 to talk through your wall
One Team for Design and Build
When one team draws and builds, fewer details get lost. The person sketching your surround is also thinking about how a concrete form will be made, how a stone course will sit, and where a steel bracket will anchor. That’s why the finished piece matches the sketch.
It also keeps schedules honest. We plan fabrication and installation together, so the date we quote reflects what actually has to happen. If you want to see how we handle a complete project, our fireplace remodeling in Redmond page walks through the stages from photos to installation.
Planning the wall around the screen
If a TV is part of the plan, we begin with it. We ask for the screen size, the viewing height from the main seat, and where the outlet and cable box live. From there we work out how deep the mantel needs to be, how high the surround should rise, and where wiring can hide. Doing this before design means the wall looks intentional when the TV is on and when it’s off.
We also consider what happens when the TV changes. Screens get replaced, and a new one may be larger. Building a little flexibility into the mantel depth and the channel size means the wall still works in five years.
Materials compared for a modern room
Concrete gives the cleanest result: smooth faces, exact edges, and room for built-in channels. Stone adds texture and works well on tall walls, though it adds weight. Wood brings warmth and is easy to size. Steel adds thin, strong lines and hidden support. For many Redmond rooms, the best answer combines two of them, such as a concrete mantel over a stone face, or a wood mantel with steel brackets.
Townhomes, Condos, and Shared Walls
A lot of Redmond housing is multi-unit, and fireplaces in those buildings come with conditions. Association rules, elevator access, delivery windows, and restrictions on noise or dust can all shape a project.
Tell us about those conditions early. We design pieces that can be carried through a normal entry, fitted on site, and finished without disrupting neighbors. We also check the fireplace’s specifications and any building limits on what can be added near the opening, so the plan fits the unit you actually have.
The Steps From Photo to Finished Wall
- Send photos of the fireplace and wall, plus the opening width and ceiling height.
- We send sketches showing a few directions, with your TV and furniture drawn in.
- You pick a design and see the cost before anything is built.
- Mantels, hearths, and metalwork are built in our Seattle shop, and the stone is set at your home.
- We install and check the fit with you.
Small rooms and open plans
Redmond homes range from compact townhome living rooms to wide open plans, and custom fireplace design has to flex between them. In a small room, we keep the projection shallow and the surround simple so the fireplace doesn’t swallow the floor. In an open plan, the fireplace often has to define a zone without walls, which calls for a bolder face and a longer mantel. Either way, the sketch shows the wall with real furniture in place.
How we talk about price
Custom fireplace design is priced to the project, so we don’t use a list. A slim cast mantel is a different scope from a stone face with a concrete hearth. The drivers are material, size, and how much has to be built into the wall. We give you a number for your chosen design before fabrication starts, and we break out the options so you can see what each one adds.
Working with your builder or designer
If a contractor or designer is handling a larger renovation, we send dimensions and templates early and match our delivery to their schedule. The aim is a wall that’s ready when our pieces arrive. If you’re managing the work yourself, we tell you exactly what to prepare, from the electrical for the TV to the floor height at the hearth.
Lighting the finished wall
A fireplace looks different in morning light, under lamps, and with the TV on. We think about where light falls on the surround and how it shows texture. A honed concrete face softens under overhead light, stone throws shadows from a side lamp, and a steel edge picks up a narrow highlight. We can plan a hidden channel for an accent light if you want one.
What installation day looks like
We arrive with the finished pieces, protect floors and furniture, and set everything in place. Stone is laid on site, while mantels, hearths, and metalwork are fitted and anchored. We check level, joints, and fit against the fireplace and the floor, then walk through the finished wall with you. If your building has rules about work hours or deliveries, we follow them.
Maintaining the finished fireplace
Care is simple. Sealed concrete and stone wipe clean with a damp cloth. Wood needs dusting and occasional attention to the finish, which we explain at installation. Forged and steel parts need little more than a dry cloth. Nothing about the finished fireplace asks you to change how you live.
Around Redmond
Redmond sits next to Kirkland and Sammamish, and our work crosses those borders. For lakeside and infill homes, see custom fireplace design in Kirkland. For plateau homes with builder-grade fireplaces, fireplace remodeling in Sammamish covers the fixes we see most. Custom fireplace design follows the same method in each place, adjusted for the house.
Redmond Fireplace Questions
Custom fireplace design means shaping the surround, mantel, and hearth to a specific room rather than choosing from a standard kit. It involves sketches, material choices, and fabrication to your measurements, so the finished fireplace fits the wall, the furniture, and the way you use the space.
Yes, and it's best planned from the start. Heat, viewing height, and cable routing all affect the design. We can build a mantel deep enough to help shield the screen and include channels for wiring.
It's a strong choice for modern rooms. Concrete gives a smooth surface, exact edges, and easy cleaning. It can be paired with wood or stone for warmth, and it can be made in custom shapes and finishes.
Yes. Custom fireplace design in a multi-unit building means planning around association rules, delivery limits, and access. Share any requirements when you contact us, and we'll build them into the schedule and the way pieces are made and installed.
The design stage is usually quick, because sketches come from photos and measurements. Fabrication takes longer, and it depends on materials and the scope of the piece. We share a schedule with the estimate so you can plan, and we tell you honestly if a deadline isn't realistic.
Cost depends on size, materials, and complexity, so we don't use a price list. You'll see the price for your specific design before fabrication begins, based on your photos and measurements.